Guide :Grilling : 700 sq. in. Cooking Area Gas Grill 14116325

Gas grill lights but doesn't get very hot

We have a Kenmore gas grill. It lights fine, but doesn't get very hot. Any recommendations regarding fixing the problem. thanks, sheldon 720.291.5500 [email protected]

Research, Knowledge and Information :

Why Won't My Gas Grill Get Hot? - Home Ec 101

Why Won’t My Gas Grill Get Hot? By Heather ... you really only need 10 seconds or so unless you are trying to grill when it is VERY cold. ... but if it doesn’t, ...
Read More At :

My propane grill will light but won't get hot - Footballguys ...

My propane grill will light but won't get hot ... Try tapping on it and if that doesn't ... My instructions tell me if it can't get above 300 degree, check the gas ...
Read More At :

Fixes for Common Gas Grill Problems - Make Your Best Home

Common Gas Grill Problems ... If this doesn't work give it a second ... this doesn't mean that one part grows volcanically hot while other areas are cool enough to ...
Read More At :

How to Troubleshoot a Gas Grill With a Low Flame | Home ...

How to Troubleshoot a Gas Grill With ... If rotating the knobs clockwise on your gas grill doesn't increase ... My Grill Has Low Flames and Will Not Get Hot Enough ...
Read More At :

Gas Grill Support - Char-Broil®

Gas Grill Support. Home › Help ... If your grill won't light and you see sparking, ... There are many reasons as to why your gas grill isn't lighting.
Read More At :

Super hot gas grill? - Houzz

Super hot gas grill? ... Those should get very hot with the ability to close the lid. ... It doesn't get quite as hot as you're saying, ...
Read More At :

Why wont my gas barbeque get hot enough to cook? | hubpages

There is another reason why your gas grill does not get hot. ... it has been and still doesn't head above 200 ... very hot day it is possible for the liquid to ...
Read More At : - Support - Help - Faqs

My grill is not getting very hot. ... Why won't my charcoal grill get hot? ... Will smoking on my gas grill be like smoking on a smoker?
Read More At :

Suggested Questions And Answer :

Gas grill lights but doesn't get very hot

I had this same problem especially when the tank on my 5 burner 2 year-old Kenmore was about half full. The solution above fixed it. I was used to opening the gas fully, turning one burner to high and clicking the button. If I would have read the front of the grill I would have seen that this was incorrect. I turned off the grill completely, unhooked the regulator and reconnected it. With one burner on high I began clicking the button BEFORE I turned on the gas. I slowly turned the gas on one quarter turn and it lit up full flame. I slowly turned the gas another quarter turn and lit the second burner. I slowly opened the gas all the way and lit the third and so on. That did the trick!
Read More At : 700 sq. in. Cooking Area Gas Grill 14116325...

Inconsistent lighting but plenty of gas flow

You are looking to replace the igniter electrode.CLICK HERE for a replacement part.Frigidaire Part Number: 5304444439Thanks for using Fixya - if you requier further clarifications - please use the "Continue with this Expert" option so we are connected in the future.Thanks :D
Read More At : GL38LKEC (LP) Grill...

I have a kenmore gas grill that has the side burner. Up until recently, it has been working great. However, now the main grill won't light when pressing the ignition button but the side burner lights instead (something we rarely use!!). We can manually light the grill but it is only 1 1/2 years old - help! Thank you! DMac

More than likely, the electrode spark ignitors on your main burners need to be cleaned. They will get covered with grease over time. Also check the wiring from the ignitor module to each spark ignitor being sure that all wiring is firmly in place. To clean the electrode(s) ... a cotton ball dipped in alcohol will work fine.Hope this helped you solve the problem and Happy Grilling!
Read More At : 700 sq. in. Cooking Area Gas Grill 14116325...

The gas grill does not get hotter than 250 degrees, i have cleaned the heat plates and the grate, after that it does not get hot enough to cook on it. why

Hi, You problem could be or probably is with the regulator...not enough gaspressure...Propane, LP, or Natural Gas Regulator Problems heatman101
Read More At : 700 sq. in. Cooking Area Gas Grill 14116325...

Only enough gas flow for 1 of 3 burners

Shut off the tank and remove it from the grill. open all valves. close all valves. Reconnect tank to cooker and SLOWLY open the valve a hair. Then retry.Something in the dang newer safety tanks cause this phenom.
Read More At : Genesis Silver B Grill...

Several times now my gas burners simply will BARELY work at all. I have recently cleaned everything and have two tanks full of new LP - I tried both of them - NO GO. I took a wrench and tapped HARD on the regulator - no go. We cooked our steaks inside, 3 hours later I went outside to put away the grill and I tried to start it - IT WORKED - WHAT IS UP? Do I need to replace the regulator? Is so, can I cut into and splice the gas lines or do I need to replace the entire harness? I have a 4 burner gill+rotissarie burner+side burner. {By the way - the side burner did light this evening when the 4 burners had maybe 1-3% of their power - what's up with this?

Hi, Your problem could be or probably is with the regulator...not enough gas pressure...Propane, LP, or Natural Gas Regulator Problems heatman101
Read More At : Elite 900 sq. in. Cooking Area Gas Grill 16690\17690...

I have a Kenmore natural gas grill, model # 141-17227. I need the woners manual. The side burner will light but very low flame, cannot get the grill to light.

Owners manual can be gotten through the internet- find parts,type in model# of item, select manual sounds like valves are clogged- propaine and natural gasses are dirty gasses-no filter, it comes up out of ground,through dirty pipes, all the way to peoples homes- and thats why they have to replace valves on hot water tanks/furnuces........
Read More At : 505 sq. in. Cooking Area Gas Grill 463350505...

I have a weber s 620 made for propane but it was converted to natural gas. i had to replace the manifold and it is made for a propane so the grill is not getting hot what can i do?

You need have the orifices that match the fuel you're using - either propane or NatGas. Once you have the correct orifices installed, you should get the proper fuel flow. The propane is at a higher pressure, so the orifice for it is smaller than the ones needed for the lower pressure NatGas. Contact Weber for the kit needed for your model grill.
Read More At : Elite 644 sq. in. Cooking Area Gas Grill 16680\17680...

Cannot get 1 side of the gas grill to ignite.

You may need to remove the gas tank from the cooker and open all valves and close them back tightly. Then reconnect the tank and turn the valve on SLOWLY just a hair. The new tanks have a safety device inside that shuts down the flow if the pressure goes out too fast. More here
Read More At : 700 sq. in. Cooking Area Gas Grill 14116321...

My kenmore elite grill has a ceramic cooking grid. it is 1 yr old.recently a problem developed. the ceramic grid lights as usual, but does not stay lit.once i let go of the knob the burner goes out. thanks in advance

Check thermo coupling., its purpose is to keep heat at flame area-helps keep flame lit,like a pilot light... clean it with a finger nail file LIGHTLY- or use sand paper LIGHTLY, just to clean surface..
Read More At : Elite 900 sq. in. Cooking Area Gas Grill 16690\17690...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || || Terms of Use || Contact || Privacy Policy
Load time: 0.0593 seconds