Guide :Grilling : Grilling

VIKING GRILL DOES NOT WORK PROPERLY

FLAME IS LOW AND DOES NOT ADJUST, ALSO SURGES AND WILL EVENTUALLY GO OUT.

Research, Knowledge and Information :


Viking Use & Care Manual - Viking Range, LLC


Viking Use & Care Manual Outdoor Gas Grills ... Do not use the grill as storage area for ... the connections are not properly sealed or you may
Read More At : www.vikingrange.com...

Viking Range Cleaning Tips | Ameripro Appliance Repair


Viking Range Cleaning Tips. ... our technicians can make sure the burners are working properly and can perform the necessary cleaning on all your ... Viking Char-Grill.
Read More At : www.ameriproappliancerepair.com...

Top 792 Reviews and Complaints about Viking Ranges


The hinges on the oven door are not working properly. ... I've known about Viking Ranges for years and ... Viking does not sell extended warranties however we did ...
Read More At : www.consumeraffairs.com...

Ive been having trouble with the ignitors on my Viking BBQ.


I've been having trouble with the ignitors on my Viking BBQ. Some would not light and some would continue to click after the burners were lit. Then all stopped ...
Read More At : www.justanswer.com...

VIKING


... Outdoor Gas Grills Viking Range Corporation 111 Front ... When using the grill, do not touch the grill ... are not properly installed. Lighting the Grill ...
Read More At : www.vikingrange.com...

VIKING GAS GRILL USE AND CARE MANUAL Pdf Download.


View and Download Viking Gas Grill use and care manual online. Viking ... Your grill must be kept clean and maintained properly. PorcelainGrates/Grill Burners The ...
Read More At : www.manualslib.com...

Do Not Buy a Viking Grill - Read expert review at epinions.com


Do Not Buy a Viking Grill. Review ... the same as the ones for in doors so they do not work ... to take back the grill and give me one that worked properly.
Read More At : www.epinions.com...

How to Troubleshoot a Gas Grill With a Low Flame | Home ...


How to Troubleshoot a Gas Grill ... My Grill Has Low Flames and Will Not Get ... How to Know If a Propane Gas Regulator Is Working Properly; Weber Grill is Not ...
Read More At : homeguides.sfgate.com...

Gas grill won’t light? It could be the Igniter « Tips, Tricks ...


Gas grill won’t light? ... What to do when the igniter’s not working. ... Is the wire’s electrode tip aligned properly within the collector box?
Read More At : www.appliancefactoryparts.com...

Suggested Questions And Answer :


Help! New Grill not flaming properly!


Good day,hope this link below will solve your problem.grilling
Read More At : Commercial Stainless Steel Grill...

Commercial Stainless Steel Grill: Have a small blue flame but the flame is not large...


The burner could be blocked or the orffice try cleaning them
Read More At : Commercial Stainless Steel Grill...

Have a large mobile propane grill with burner problems


Ok, here is a check list for your most common gas grill lighting problems:1) Check your tank. Is it empty or nearly empty? The tare weight (T.W.) of your cylinder is stamped on the collar. This is the weight of your empty cylinder, usually around 18 lbs. Weigh it on your bathroom scale. Propane weighs 4.25 lbs/gal. If it weighs around 20 lbs or less - Refill it. If not, go to #2.2) Make sure you didn't turn the gas tank valve on too fast. Some gas hoses have a built-in excess flow valve that stops the flow of gas to a trickle if opened too fast. Close the tank valve and let sit for a few minutes. Or just disconnect it and reconnect it. Turn the tank valve very slowly and then try lighting it again. If it doesn't help, go to #3.3) Is the igniter sparking? Some are battery powered-check the battery or replace it. If you have a standard push button piezzo igniter or a rotary style igniter, check for spark. Can you hear or see the spark? It's hard to see the spark in bright daylight. It's easier to view the spark at dusk or dawn. It should spark an "arc" at the burner. If not, adjust it if necessary. The igniter wire may have a short, causing the spark to arc somewhere else along the wire and not at the burner. Replace igniter wire. It's also possible the igniter tip where it sparks has a cracked or broken porcelain portion of the igniter, causing the spark to not arc at the tip where it's supposed to. Replace the igniter piece. If not, go to #4.4) You may have a rusted, clogged or damaged burner or venturi tube. With a flashlight, check for spider webs, wasp nests or dirt (mud) dauber nests in the opening of the venturi tube where it connects at each gas valve orifice. Clean it out manually or blow it out with air compressor. Make sure the air adjustment opening (on the end of the burner's venturi tube) has not been changed. If it's closed too much, it will be difficult to light and cause lazy yellow flames. If it's not clogged, the burner may just be old and rusted and the burner holes are not allowing very much gas through anymore. It's also possible the burner has rusted so bad, the burner holes have been enlarged, it is falling apart or has cracks along the burner seams. If so, replace the burner(s) immediately. It is unsafe to use. Your local propane co can usually order the parts you need and some will even do the work, if you are uncomfortable doing it yourself. Bring with you the Make, Model and Serial number of the grill, so they can order the correct parts for your specific grill.Have a large mobile propane grill with burner prob - 2_bing.gifify whether it's natural gas or propane.5) If none of these resolve the issues you are having, it is also possible you have a faulty or defective regulator, which may mean replacement. If the pressure still seems too low and none of the above has helped, and you have a silver/gray regulator; many have an adjustment screw on the top center of the diaphragm. Remove the outer cap and turn the inside screw clockwise in 1/4 turns to increase the pressure until the desired flame size is accomplished. Flames should be as blue as possible, but will burn orange if there is food or drippings on it. Yellow flames are not good, and will soot up everything and not cook as hot as blue flames do. Yellow flames could mean you do not have the right air shutter adjustment, clogged burners, or possibly defective burners, as mentioned above in #4. 6) Also make sure you have the hose connection tightened snugly to the propane tank valve to ensure the inner valve seat is fully depressed allowing gas to exit fully without any restriction. The black plastic female fitting should be hand tightened only. Older versions that use a left-hand male brass POL valve, requires a 7/8 open end wrench or adjustable wrench to tighten.Hope this helps! Good luck in your trouble shooting! Douglas
Read More At : Extra Large - XLHD All-in-One Grill / Smoker...

Problem with gas getting to the front burner


Follow manufacturer's recommendation in resetting the excess flow safety device....(Turn burners and LP cylinder off...Disconnect regulator on cylinder. Turn both knobs to high for at least one minute...Then turn them to off...reconnect the regulator to the LP tank...Turn LP valve VERY slowly (30 seconds) until fully opened..then start the grill in the usual manner. ALWAYS TURN THE LP TANK OFF WHEN DONE USING THE GRILL....
Read More At : Genesis Silver B Grill...

Gas BBQ - Won't light


Hi Be sure the thermostat or heat dial is set properly. If the appliance has a pilot light, be sure it's working. make sure that you connected the pipeline correctly open the faucet of the tank try to fire it up ? working ? good... NO???? close everything(faucets,plugs...) your new tank that you connected is empty.... it happens.... have a good 1
Read More At : Turbo Classic 3-Burner 207795 (LP) Grill...

Lighting Problem/2 year-Old Ducane Grill


Do you have enough gas pressure coming out of the regulator and gas valve? You'll need a pressure guage for this. If yes, try taking out the burners and cleaning them with a wire brush, especially the flame spreading sections.
Read More At : 30400040 Stainless Steel Grill...

I have a traeger bbq 100 that has worked great for 3 years, but now it will not get hot enough. The auger turns properly, so my only thought is that it is not turning fast enough to feed the proper amount of pellets to reach higher temperatures. Any advice?


I changed the biscuits on mine, and it got hotter
Read More At : BBQ100 All-in-One Grill / Smoker...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mainebirdfood.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0696 seconds