Guide :Grilling : 16225 Grill

Kenmore 3 burner grill not lighting

Our 3 burner Kenmore gas grill isn't lighting. The usual "clicking sound" is not present when we push our ignition switch. We tried changing the battery, but we still have no luck. Any ideas?

Research, Knowledge and Information :

Kenmore Elite 3 Burner Gas Grill - Sears

Kenmore Elite 3 Burner Dual Fuel Gas Grill ... assembly and delivery is free This is so close to a Weber in dimensions that the Weber Grill Light fits perfectly on ...
Read More At :

Kenmore can only light 3 of 6 burners - BBQ Source Forums

I have a large six burner kenmore gas grill that will not light more than 3 burners at any time. Any three can be lit and they all work independently. The a...
Read More At :

Kenmore Grill side burner does not light... | Sears PartsDirect

Kenmore Grill side burner does not light. I received for father's day a gas gill with side burner. The side grill will not light. I went through all the problem ...
Read More At :

Kenmore 3-Burner Gas Grill - Outdoor Living - Grills ...

The only problem was some dripping coated the igniter on the center burner that prevented it from lighting up. ... this Kenmore 3-Burner Gas Grill can cook up to 24 ...
Read More At :

Kenmore Elite 3 Burner Gas Grill - Sears - Kmart

Kenmore Elite 3 Burner Dual Fuel Gas Grill ... the Kenmore Elite 3 burner dual fuel champagne gas ... and easy lighting. The side shelves of this Kenmore ...
Read More At :

KENMORE - Propane Grills - Gas Grills - The Home Depot

Shop our selection of KENMORE, Propane Grills in the Outdoors Department at The Home ... Lighting & Ceiling Fans; Outdoor ... KENMORE 3 Burner Pedestal Grill in Mocha
Read More At :

KENMORE - Gas Grills - Grills - Outdoor Cooking - Outdoors ...

Shop our selection of KENMORE, Gas Grills in the Outdoors Department at The Home ... Lighting & Ceiling Fans; Outdoor ... KENMORE 3 Burner Pedestal Grill in Mocha
Read More At :

Kenmore 3 Burner Red Patio Grill - waterbury garment Reviews

Browse unbiased reviews and compare prices for Kenmore 3 Burner Red Patio Grill - waterbury ... the Kenmore 3-Burner Patio Grill The ... for easy lighting, ...
Read More At :

Kenmore gas range - burner sparks but does not light up ...

Get shopping advice from experts, friends and the community! The big burner on my Kenmore gas range (model no. 790.78763407) does not light up, even though the ...
Read More At :

Suggested Questions And Answer :

Kenmore 4 burner grill only lights 3 burners

Looks like your regulator is not venting properly to relieve the back pressure. The best thing you can do here is replace the regulator.
Read More At : 490 sq. in. Cooking Area Gas Grill 15227...

I have a stainless steel Kenmore propane grill, model 119.16311800. It has four burners and a side burner on the left. It is two years old and has performed perfectly for two years. I am now having trouble with the flame. It will light and if I only have one burner on it will give a good flame. Lighting additional burners will reduce the flame size, when all four main burners are on they struggle to stay lit. We recently moved, and the grill was out of gas for an extended period. The problem first presented after a relative gave me a gas tank. Initial inspection showed some debris in the valve of the tank itself. I tried removing the debris from the tank with partial success. I connected it to the grill and had the same issue. Got a new tank. Fired up and cooked up some great burgers. thought I was all set until the next time when the new tank also produced the same results. I have not been able to disassemble the burners to check/clean the venturi tubes. (ever) It appears that there is a screw at the rear of the burners that will release it, but they are badly corroded and will not come out by standard means. If you could confirm this is indeed the proper way to remove the bruners I will drill them out and devise a better way to fasten them afterwards. Also, I did read here about opening the gas tank valve very slowly. I disconnected the regulator, waited a few minutes, reconnected and opened very slowly. Light the furtherst burner first and proceeded to find the problem still existed. I understand that the regulator may also be faulty. Given that there is no gauranteed life cycle for any product, can you estimate a typical life span for a regulator? How would I go about checking the regulator? I fear that when I tried to remove the gunk in that old tank some loose particals may have gotten into the regulator and damaged it. Thank you very much for any assistance you can give!

With all the you described, your best bet is to replace the grill hose/regulator assembly. It's not expensive and it's not difficult to do. You can find the hose/regulator assembly at any home center or hardware store that sells gas grills. The assembly is universal, but take your old one with you for comparison purposes.As far as replacing the burners are concerned, that's not difficult either. And you may be able to find the replacement burners at , as they made the Kenmore grills for Sears. And yes, the scenario you gave for removing the burners is correct.Hope this helped you and you will be kind enough to give my response to you, a positive rating.Happy Grilling!
Read More At : Kenmore...

Loss of pressure on Kenmore 16322

I can tell you EXACTLY what is wrong. Remove the tank and open all valves to the grill. Reconnect the tank and turn it on just slightly. Relight the grill.Ther is a safety device in the tank that needs to be reset. The only way to do it is removing the tank.
Read More At : 16322...

I have a kenmore gas grill that has the side burner. Up until recently, it has been working great. However, now the main grill won't light when pressing the ignition button but the side burner lights instead (something we rarely use!!). We can manually light the grill but it is only 1 1/2 years old - help! Thank you! DMac

More than likely, the electrode spark ignitors on your main burners need to be cleaned. They will get covered with grease over time. Also check the wiring from the ignitor module to each spark ignitor being sure that all wiring is firmly in place. To clean the electrode(s) ... a cotton ball dipped in alcohol will work fine.Hope this helped you solve the problem and Happy Grilling!
Read More At : 700 sq. in. Cooking Area Gas Grill 14116325...

Weak Flames on Propane Grill

It is possible that your burners are clogged. Clean the burner ports with a paperclip (not a toothpick).
Read More At : Elite 644 sq. in. Cooking Area Gas Grill 16680\17680...

Low pressur on gas grill

Orfices are possibly clogged with spider web and the check to see if your dial on tank is fully open and check to see if your tank is almost empty...
Read More At : 700 sq. in. Cooking Area Gas Grill 14116325...

The grill burners are not lighting, but the side burner does light. I have a 3 year old Kenmore grill with four burners.

Brian, is it case of the 3 ignitors not working or is it a case of gas not getting to those 3 burners? Have you tried match lighting any of those 3 burners? I ask the above questions in an effort to determine which solution will work for you. Please advise and thanks for choosing FixYa.
Read More At : Kenmore...

My kenmore elite gas grill will light, then quickly go out.

Check for leak if it is propane if no leak most likely regulator and hose
Read More At : Grilling...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || || Terms of Use || Contact || Privacy Policy
Load time: 0.0630 seconds